Products — rollers, wheels and cast parts

Rouleaux industriels recouverts de caoutchouc et de polyuréthane — Soremag, Laval (Québec)

Roller Covering

Rubber or polyurethane, refurbished on your existing core — hardness and finish to suit.

In rubber In polyurethane

View →

Roues industrielles recouvertes de polyuréthane et de caoutchouc — chariot élévateur, transpalette, roulettes

Wheel Covering

Forklift wheels, pallet jack rollers, casters and drive wheels — polyurethane or rubber.

View →

Pièces moulées en polyuréthane sur mesure pour applications industrielles — Soremag, Québec

Cast Polyurethane Parts

Bushings, bumpers, wear parts (including ceramic + polyurethane), parts overmolded onto metal and much more, cast to your specs.

View →

Not sure which material? → Material Selection Guide

Rouleaux par spécialité

The right roller for every position on your line

Driving, pressing, applying, squeezing, spreading, cooling: what the roller does in the process sets its hardness, its profile, its finish and its grooving. Every specialty has its own page — and so does each material.

Paire de rouleaux formant un nip — polyuréthane coulé rouge contre acier poli, film plastique pincé sur la ligne de contact

Nip, press and laminating rolls

Even pressure from one end of the face to the other, without marking or dishing the product — profile, concentricity and elastic recovery of the covering.

View →

Rouleau de tirage recouvert de polyuréthane coulé bleu, pignon et chaîne d'entraînement visibles

Drive rolls and pull rolls

Moving the product along without slipping or marking it: traction is set by the wrap angle, the finish and the surface pattern.

View →

Rouleau applicateur recouvert de polyuréthane coulé vert satiné sur mandrin d'acier

Applicator and metering rolls

Adhesives, paints, varnishes, inks, oils and dyes: laying down the right film thickness, and holding up over time against the product being transferred.

View →

Rouleau essoreur recouvert de caoutchouc noir à rainures d'évacuation — coupe du recouvrement et portées usinées visibles

Squeeze rolls, wash rolls and scrapers

Pulling the water, the bath or the excess liquid out of a running web, in spite of the chemistry, the edge cuts and the hot humidity.

View →

Rouleau de guidage libre à recouvrement mince gris, roulement étanche au bout — rotation libre et faible inertie

Guide rolls and idler rolls

The free-turning rolls, driven by the product itself. An idler that drags will scratch: it all comes down to the bearing, the inertia and the finish.

View →

Rouleaux de pré-étirage en polyuréthane coulé à chaud, plusieurs duretés et couleurs, pour machines d'emballage

Pre-stretch rollers

Primary and secondary rollers for pallet wrappers (stretch wrappers): diameter and grip set the stretch ratio, and with it your film consumption.

View →

Rouleau déplisseur banane en polyuréthane coulé à chaud sur mandrin cintré — élimination des plis, Soremag, Laval (Québec)

Spreader rolls (bowed rolls)

Bowed rolls (expanders) that spread the web and take out the wrinkles — curved core and a covering matched to the material.

View →

Rouleaux rainurés en polyuréthane — motifs diamant, chevron et hélicoïdal usinés selon la fonction, Soremag Québec

Grooved Rollers

Diamond, herringbone, spiral, circumferential or longitudinal patterns — to shed air or water, or to drive without slipping.

View →

Roue de contact pour sableuse à bande recouverte de caoutchouc à rainurage hélicoïdal, arbre claveté — équilibrage dynamique

Sander Rollers

Contact rolls and wheels for belt sanders — hardness and grooving to match the sanding aggressiveness you are after.

View →

Rouleaux recouverts de polyuréthane coulé

Choix de matière

Polyurethane Rollers

Is abrasion, load or cutting what decides service life? Cast polyurethane can be formulated from soft to very hard, on your existing core.

View →

Trois rouleaux industriels recouverts de caoutchouc

Choix de matière

Rubber Rollers

Natural, SBR, nitrile, neoprene, EPDM, silicone: the family is picked based on what the roller touches, the temperature and how much give you want.

View →

Rouleau recouvert de silicone orange mat sur mandrin d'acier — coupe du recouvrement et portées usinées visibles

Choix de matière

Silicone Rollers

Extreme heat, non-stick, FDA food contact: the specialist for the positions where other elastomers do not last.

View →

Your roller is not in any of these families? Winding, slitting, folder, capstan, foam, sleeves — send us a photo, a drawing or the worn part: we will assess feasibility.

Pièces moulées sur mesure

We cast the part your process calls for

Sizes, hardnesses, overmolding onto metal, machining tolerances: every family has its own page. And if your part fits none of them, we still reproduce it — from a drawing, from a sample or from the worn part.

Plaques et garnitures d'usure en polyuréthane coulé sur support d'acier — protection contre l'abrasion, Soremag Québec

Wear plates & liners

Plates, sheets, pads and liners — polyurethane on its own, on a steel backing plate or with ceramic embedded.

View →

Pièces en polyuréthane surmoulées sur métal — roues sur moyeu d'acier, plaques et bagues à âme métallique, Soremag Québec

Metal Overmolding

Polyurethane cast onto steel, stainless, aluminum, hubs, shafts and inserts — the stiffness of metal, with a surface that takes the beating.

View →

Bagues, coussinets et manchons en polyuréthane coulé de 10 Shore A à 85 Shore D — Soremag, Laval (Québec)

Bushings, plain bearings & sleeves

Guiding, protecting, cushioning and isolating metal-to-metal contact — bores machined to tight tolerance.

View →

Racleur de courroie en polyuréthane orange installé sur un convoyeur — arête de raclage vive, dureté typique 85-95 Shore A

Scrapers, blades & wipers

Conveyor belt scrapers, cleaning blades and flexible lips — profile and hardness to match the belt and the product.

View →

Tampons, butées et amortisseurs en polyuréthane coulé à chaud — à goujon fileté, insert taraudé ou platine d'acier

Bumpers, stops & shock absorbers

Absorbing energy, limiting travel, cutting down impact — with or without a stud, an insert or a metal plate.

View →

Engrenages, pignons et roue étoile en polyuréthane coulé sur moyeu d'acier claveté — entraînement plus silencieux

Gears, sprockets & star wheels

Quieter drive components, with or without a metal hub — reproduced without a drawing when needed.

View →

Pièces sur mesure en polyuréthane coulé : feuilles et tiges, doublure, réa à gorge et buse

Other custom parts

OEM part, invention or off-the-shelf product: we reproduce it, adapt it, improve it — seals, pulleys, liners, guide rollers and more.

View →

Vue d'ensemble des pièces moulées en polyuréthane Soremag — bagues, butoirs, pièces d'usure et pièces surmoulées

See all cast parts

The pillar page: part families by function, our molding capabilities and the formulation options.

View →

Custom work, engineered and built in Quebec

Something out of the ordinary? Tell us what you need — we will find the solution.

Duromètres Rex Shore A et D, bloc de calibration (test block kit), rouleaux en nylon et téflon et roue en plastique

Aussi disponibles

Rex durometers (Shore A/D) and calibration blocks · epoxy coatings · nylon & Teflon · nylon and plastic wheels · other plastic products.

Ask us →

Frequently asked questions about our products

To help you find your way through the line — and know where to start.

Do you only cover existing parts, or do you build new ones too? +

Both. We cover your existing roller, wheel or part, and we also build complete new ones: a roller with a core machined in-house, a wheel or a cast part made from your drawing or from a sample. See our three families: roller covering, wheels and cast parts.

How do I know which type of roller I need for my line? +

Start from what the roller does in the machine: nipping, driving (traction), applying, squeezing, guiding… Our Rollers by specialty section groups the 12 families by function. If you are still unsure, just tell us what the roller does — we will point you to the right one.

What is the difference between a covering and a cast part? +

A covering adds a layer of elastomer to an existing core — a roller or a wheel that we prepare, cover and grind. A cast part is a complete part poured in a mold: scraper, bushing, bumper, wear plate. Both processes are done entirely in our Laval shop.

Do you work with materials other than rubber and polyurethane? +

Yes. Silicone is our third covering material, for high-temperature applications and contact with hot product. We also carry complementary products: nylon and Teflon rollers, plastic wheels, epoxy coatings and Rex durometers.

I cannot find my product on the site — can you still make it? +

Probably, yes: most of what leaves the shop is custom, and we run on a challenge. Describe what you need with a photo or a sketch in a quote request — if we cannot make it, we will tell you where to get it.

Our products: rollers, wheels and cast parts

Polyurethane and rubber experts

Roller Covering

Wheel Covering

Cast Polyurethane Parts

The right roller for every position on your line

Nip, press and laminating rolls

Drive rolls and pull rolls

Applicator and metering rolls

Squeeze rolls, wash rolls and scrapers

Guide rolls and idler rolls

Pre-stretch rollers

Spreader rolls (bowed rolls)

Grooved Rollers

Sander Rollers

Polyurethane Rollers

Rubber Rollers

Silicone Rollers

We cast the part your process calls for

Wear plates & liners

Metal Overmolding

Bushings, plain bearings & sleeves

Scrapers, blades & wipers

Bumpers, stops & shock absorbers

Gears, sprockets & star wheels

Other custom parts

See all cast parts

Custom work, engineered and built in Quebec

Frequently asked questions about our products

Do you only cover existing parts, or do you build new ones too? +

How do I know which type of roller I need for my line? +

What is the difference between a covering and a cast part? +

Do you work with materials other than rubber and polyurethane? +

I cannot find my product on the site — can you still make it? +

Can't find it? Give us a call.